Cutting Systems
    "OPTIMA" GAS CONTROL SYSTEM: Oxy/Fuel Gas Control with high/low automatic preheat. High volume oxygen cutting dome loaded regulator with a pierce rate control.    
"OPTIMA" GAS CONTROL SYSTEM: Oxy/Fuel Gas Control with high/low automatic preheat. High volume oxygen cutting dome loaded regulator with a pierce rate control.
    "FITZ-ALL" MOTORIZED TORCH HOLDER: This lifter station is driven by a ballscrew and guided by two linear shafts. It incorporates a mechanical clutch alleviating any possibility of stripping gears or burning out motors.    
"FITZ-ALL" MOTORIZED TORCH HOLDER: This lifter station is driven by a ballscrew and guided by two linear shafts. It incorporates a mechanical clutch alleviating any possibility of stripping gears or burning out motors.
click here for more information
    TEST PEN A simple means of checking the squareness of your machine. Available for all torch models.    
TEST PEN A simple means of checking the squareness of your machine. Available for all torch models.
click here for more information
    OPERATOR CONTROL CONSOLE: State of the art electronics with the following functions: Plasma Start/Stop, Plasma Manual/Auto, Plasma Auto Height On/Off, Gas Hi/Lo Preheat, Cut Oxygen, Station Lifters Up/Down (individual & all up) Cut Oxygen On/Off (individual torch) Speed Control, Emergency Stop. Back panel will accommodate Burny component plug-ins.    
OPERATOR CONTROL CONSOLE: State of the art electronics with the following functions: Plasma Start/Stop, Plasma Manual/Auto, Plasma Auto Height On/Off, Gas Hi/Lo Preheat, Cut Oxygen, Station Lifters Up/Down (individual & all up) Cut Oxygen On/Off (individual torch) Speed Control, Emergency Stop. Back panel will accommodate Burny component plug-ins.
click here for more information
    "COLLISION MASTER" Protective Mount for Plasma Torches or Robotic Heads that may crash due to an obstruction. The Collision Master will respond to a 1/8" deflection stopping all function and saving the Plasma Torch or Robotic Head. Brackets are available suitable for a variety of torches.    
"COLLISION MASTER" Protective Mount for Plasma Torches or Robotic Heads that may crash due to an obstruction. The Collision Master will respond to a 1/8" deflection stopping all function and saving the Plasma Torch or Robotic Head. Brackets are available suitable for a variety of torches.
click here for more information
   
PNEUMATIC MARKING TOOL Punch/Scribe Pneumatic Tool for layout and identification of plate.
   
PNEUMATIC MARKING TOOL Punch/Scribe Pneumatic Tool for layout and identification of plate.
FLAME CUTTER CLEANER Flame Cutter Cleaner was developed expressly for the purpose of cleaning and protecting rail surfaces, gear racks, bearings, ways and other machine surfaces.
FLAME CUTTER CLEANER Flame Cutter Cleaner was developed expressly for the purpose of cleaning and protecting rail surfaces, gear racks, bearings, ways and other machine surfaces.

Home  |   Cutting Machines  |   Predator Series   |   Remanufactured Machines
Retrofit Products  |   Software & CNC Controls  |   Request For Information
4567 East 71st. Street - Cleveland, Ohio 44105 - Ph:216-928-0500 - Fax:216-928-0502
Site Copyright © 2001-2005 Cutting Systems Incorporated.
Site design by World Synergy Enterprises

How did you find us? Did you search on one of the following terms:
"OPTIMA" GAS CONTROL SYSTEM: Oxy/Fuel Gas Control, high/low automatic preheat, High volume oxygen cutting dome, loaded regulator, pierce rate control. OPERATOR CONTROL CONSOLE: State of the art electronics with the following functions: Plasma Start/Stop, Plasma Manual/Auto, Plasma Auto Height On/Off, Gas Hi/Lo Preheat, Cut Oxygen, Station Lifters Up/Down, Cut Oxygen On/Off, Speed Control, Emergency Stop,Burny component plug-ins, FITZ-ALL" MOTORIZED TORCH HOLDER, lifter station, ballscrew, mechanical clutch, "COLLISION MASTER", Protective Mount for Plasma Torches, Robotic Heads, The Collision Master, Plasma Torch, Robotic Head, TEST PEN, checking the squareness of machine, PNEUMATIC MARKING TOOL , Punch/Scribe Pneumatic Tool, FLAME CUTTER CLEANER, Flame Cutter Cleaner.