TOMAHAWK 625 AIR

• The ability to control the output of the arc allows for cutting different levels of material mass.
• The ability to initiate the plasma arc through a Touch Start System.
• The ability to cut through gaps on expanded metal through a Rapid Arc Restrike.
• The ability to ease the air flow rate without the use of the plasma arc through the Front Panel Purge Control.
• The ability to control the new electrode and nozzle design that works to Cool Operation and grant a Long Consumable Life.
• The ability to operate with an input power of 208/230/1/50/60.

The Lincoln Tomahawk 625 is an air plasma cutting system that allows for more rapid cuts and long-term use. Its lightweight nature makes it easy to carry between job sites, and its ability to be hooked up in different environments increases this portability. The handheld plasma torch comes with a cable, a consumable kit, and a clamp. The goal of the Lincoln Tomahawk is to increase ease of use while also increasing productivity. The input power allows for an increased cutting range, and the long consumable adds cost-effectiveness to the machine

Tomahawk 625 Air Plasma Cutter has 40 amps of cutting power to cut mild steel up to 5/8" thick. The Tomahawk's rapid arc restrike cuts through material quickly and efficiently. The system detects if the parts were installed correctly, including the installation of the torch, which ensures that the job is completed to safety standards. The 625 Air can be used in Maintenance, light construction, HVAC ductwork, or even demolition work. Its portability allows for it to be moved between sites, making it usable for multiple, wide-ranging projects.

• 24 A @ 89.6 V, 100%
• 29 A @ 91.8 V, 60%
• 40 A @ 96 V, 35%
• Handheld plasma torch
• Consumables Kit
• LC40 Hand Torch with 20 ft Cable
• Work Clamp & Cable
• Minimum Amperage 10 A
• Plasma Torch Cable Length 20 ft
• Ground Cord Length 20 ft
• Overall Height 15.2
• Overall Width 8.5 in
• Maximum Material Thickness 3/4 in
• Minimum Material Thickness 1/4 in